One Piece - Zoro's Shusui (STL File) STL Settings: I used a gyroid

Settings: I used a gyroid infill structure at 5% infill density and tree supports to get a strong print with a clean surface quality before sanding

but also requiring a lot of support underneath

3ft x 1/2in diameter wooden dowel (3x)

Channel the strength

The parts are rather large and the support material should be minimal

One Piece - Zoro's Shusui (STL File) STL Settings: I used a gyroid(STL FILES ARE FOR 3D PRINTING, NOT A PHYSICAL ITEM) Hey! Here's the STL File(s) for the Settings: I used a gyroid infill structure at 5% infill density and tree supports to get a strong print with a clean surface quality before sanding. Required Materials: 3D Printer Sandpaper Paint Hot glue or super glue