SureClose Non Safety Weld-On Hinge, Heavy Duty C10223 Can also be used as

Can also be used as an uphill hinge for gates: By purchasing one of each size hinge (one 6" and one 10")

Attaches to the male spline on the window operator and the female spline on the crank handle

free swing between 90 & 31 degrees

if you have a countertop door that is 30 inches long by 18 inches wide and it weighs 8 pounds

Alignment: The centerline of the hinge pins of both hinges (top and bottom hinge) after installation

SureClose Non Safety Weld-On Hinge, Heavy Duty C10223 Can also be used asNOTE: Post mounting brackets sold separately. The recommended setup requires two hinges and two mounting brackets. SureClose hinges for weld on applications. Allows a gate to swing to a maximum of 180 degrees in one direction. Hinge requires face of gate and post to be flush. Requires minimum post size of 3" x 3". Self closing or non self closing versions available. Self closing version closes from 0 to 85 degrees and holds open from 86 180 degrees.