180 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (28.0 mm OD, 152.4 mm CLR) 200 "Bottle-Jack" This roll set will bend

This roll set will bend the following sizes of material: 1-1/4" x 1-1/4" Square

Note: Requires 2 1/4-14 x 1 1/8" outside threads and 1-8 x 3/4" internal threads on the hydraulic cylinder

Centerline Radius: 7" (177

Increases repeat bend accuracy

Includes: 1-3/4" Dimple Dies | Requires 1-3/4" Pilot Hole

180 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (28.0 mm OD, 152.4 mm CLR) 200 "Bottle-Jack" This roll set will bendSpecs Outside Diameter of the Tubing (OD): 28. 0 mm Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 6" (152. 4 mm) Maximum Degree of Bend: 180, after springback Includes Steel Main Die Steel Backing Block with Anti Springback Tab Steel U Strap Resources Tube and Pipe Bending