Flush Cut Pull Saw | Double Edge | 150mm Dado Stack 5 mm) leaves a narrow

5 mm) leaves a narrow kerf that reduces material waste and helps you speed through cuts

Because it’s 12" and has 80 ATB teeth

NOTE: The lapping sheets are not labeled

Stagger tooth design for clean sharp holes

power tools and anything up to 25 pounds—that’s the equivalent of EIGHT full size routers

Flush Cut Pull Saw | Double Edge | 150mm Dado Stack 5 mm) leaves a narrowDouble edge pull saw for flush cutting. No set to teeth. Won't scratch wood surface. For soft and hard woods. This saw is made for when you need to cut a dowel, tenon, wedge, trim, or other component flush to an adjacent surface. Both edges on the saw have crosscut teeth, one edge is designed for hardwoods the other is better suited for softwoods. Unlike most saws this saw does not have any "set" to the teeth. "Set" is when the teeth are slightly bent